PsychonautWiki Archive

DMT ingestion methods: Difference between revisions

← Older editNewer edit →
>Kenan
No edit summary
>Unity
Begin proofread/cleanup/restructure.
Line 3: Line 3:
{{SubstanceBox/DMT}}
{{SubstanceBox/DMT}}
__NOTOC__
__NOTOC__
'''DMT''' alone must be vaporized to ingest. When combined with an [[MAOI]] it can be taken orally and is commonly refered to as [[ayahuasca]] when taken in this form. This article covers a variety of different techniques which one can use to ingest DMT.
'''DMT''' in its pure form must be administered either by vaporization or smoking. This article covers a variety of different techniques which one can use to ingest DMT via inhalation.


=== "Ecig" vaporizer and eliquid mix ===
==Vaporization==
''Note: This is listed first by the author not because it is necessarily the most used or suggested method, but because it seems to be the easiest method for beginners(the most likely to read this) as it produces a particularly smooth vapor and you don't need much technique other than breathing.''


===== '''Preparing the eliquid''' =====
=== Oil burner/Freebase pipe ===
Use an eliquid that is a 70/30 PG/VG mix. Flavor does not matter, but ideally a liquid without nicotine should be used so the experience is "pure". Measure out the amount of milliliters you need, then weigh out DMT to mix with it. Ratios between 1:1(g:ml) and 1:6(g:ml) are commonly suggested. 1:4 is a good place to start, giving some wiggle-room on either side. ''Ex: 2ml liquid and 500mg DMT would be a 1:4 mix''
In an oil burner or freebase pipe, sometimes referred to as a meth pipe due to it's notable usage for vaporizing that drug, DMT crystals are placed in the bulb, then a heat source is used to heat up the glass and vaporize the DMT via conduction. The resulting vapor is then inhaled and held in the lungs for a 10-20 second period to allow for maximum absorption.


Mix thoroughly, taking care to break up any clumps of DMT and make a consistent mixture. Prime the coil on the vape and then fill the tank with this mix.
=== Glass Vapor Genie (GVG) ===
 
Often referred to as one of the most efficient and easy ways to ingest DMT, the Glass Vapor Genie and similar vaporizers use convection to vaporize the DMT by passing a heated air stream over the crystals. While the GVG is one of the more expensive tools for DMT ingestion, it is often the highest-rated due to it's ease of use and efficiency.
Run the tank under warm/hot water for about a minute to dissolve the DMT better. Now no floating particles should be visible.
 
''Optional: Use a blunt tipped syringe to suck up the mix and heat it before putting it in the tank. This makes it easier to make sure it' dissolves well, and is also easier to fill the tank.''
 
===== '''Use''' =====
''Note: This is by no means the only or necessarily best technique, but will work and has several benefits''
 
Most battery and tank combinations should work fine. The big thing is to have a sub-ohm coil in the tank, and ideally a battery that allows the power to be adjusted. As a place to start, try 35W for power and a 0.4ohm coil.
# Attach the tank to the battery and prepare for the experience however you wish
# Do whatever your vape does to turn on the power and inhale as much as you can without coughing or burning your throat
# Hold for 10 seconds
# Exhale, then quickly take one or two breaths of fresh air to refresh your lungs
# Repeat 3-6 times, or until you are where you want to be
 
===== Timing: Try to take breaths quickly to get as the breaths in quick before the tolerance builds up. After 2 minutes or so the tolerance should be present =====
 
===== Storage: Store the tank in a dark and ideally cool place to prevent the DMT from breaking down. =====
 
===== Benefits of this method: easy to prepare, easy to use (no worrying about managing the lighter or heat or where to put a hot pipe as you begin to feel effects), convenient to travel with and use, no harsh smoke and extremely little risk of burning material. =====
 
=== Oil burner/ freebase pipe ===
In an oil burner or freebase pipe, sometimes referred to as a meth pipe due to it's notable usage for vaporizing that drug, DMT crystals are placed in the bulb, then a heat source is used to heat up the glass and vaporize the DMT via conduction. The resulting vapor is then inhaled and held in the lungs for a period to allow absorption.


=== Glass Vapor Genie(GVG) ===
=== "The Machine" ===
Often referred to as one of the most efficient and easy ways to ingest DMT, the Glass Vapor Genie and similar vaporizers use convection to vaporize the DMT by passing a heated air stream over the crystals. While the GVG is one of the more expensive tools for DMT ingestion, it is often the highest-rated due to it's ease of use and efficiency.
"The Machine" is made by taking a small glass bottle and putting a copper scrubber is the neck and a hole in the bottom. The copper mesh is heated before pouring the DMT onto it, allowing it to stick to the metal. It is important to heat the scrubber thoroughly before using it to burn off any coatings that may be on it. After the DMT is on the copper, a lighter is used much the same way as the GVG above in order to vaporize using a hot air stream and by heating the scrubber. A straw is often put it the hole is the bottle to make it easier to breathe from.


=== "The machine" ===
==Smoked==
"The machine" is made by taking a small glass bottle and putting a copper scrubber is the neck and a hole in the bottom. The copper mesh is heated before pouring the DMT onto it, allowing it to stick to the metal. It's important to heat the scrubber thoroughly before using it to burn off any coatings that may be on it. After the DMT is on the copper, a lighter is used much the same way as the GVG above in order to vaporize using a hot air stream and by heating the scrubber. A straw is often put it the hole is the bottle to make it easier to breathe from.


=== Sandwich method ===
=== Sandwich method ===
The sandwich method involves layering DMT between a herb such a marijuana, an inactive herb, or ash, put into a pipe, bong, or anything else commonly used for smoking. With this method a lighter is used above the bed of herbs, trying not to light it on fire, in order to use the heat to vaporize the DMT between the layers. This method allows for a little room for error in that it will still work fairly well if the herb is lit on fire, but is not know for being particularly efficient.
The sandwich method involves layering DMT between a herb such a marijuana, an inactive herb, or ash, put into a pipe, bong, or anything else commonly used for smoking. With this method a lighter is used above the bed of herbs, trying not to light it on fire, in order to use the heat to vaporize the DMT between the layers. This method allows for a little room for error in that it will still work fairly well if the herb is allowed to catch on fire, but is otherwise known to be inefficient and difficult to fully breakthrough on without using up excess material.


This method can also be used to create a gravity or waterfall bong to create a larger hit easier.
This method can also be used to create a gravity or waterfall bong to create a larger hit easier.
Line 49: Line 25:
=== Enhanced leaf ===
=== Enhanced leaf ===
Enhanced leaf is created by taking a herb, often in inactive one such as mint, and mixing it with a solution of DMT and solvent such as isopropyl alcohol, butane, or acetone. There are many different recipes and mixtures for enhanced leaf, often based on changing the proportions of DMT and herb, but the basic recipe for a simple 1:1 mix is as follows:
Enhanced leaf is created by taking a herb, often in inactive one such as mint, and mixing it with a solution of DMT and solvent such as isopropyl alcohol, butane, or acetone. There are many different recipes and mixtures for enhanced leaf, often based on changing the proportions of DMT and herb, but the basic recipe for a simple 1:1 mix is as follows:
# Weigh out the amount of DMT you wish to use. It is often suggested to work for amount in excess of 250mg to make it easier to work with.
# Weigh out the amount of DMT you wish to use. It is often suggested to work for amount in excess of 250mg to make it easier to work with.
# Weigh out an equal amount of herb.
# Weigh out an equal amount of herb.
Line 60: Line 37:


=== Changa ===
=== Changa ===
Changa is similar to enhanced leaf(above) in the process to make it, but involved an [[MAOI]] in order to lengthen the experience. There are also many different changa recipes in terms of ratios and what is used to make it, with common MAOIs being caapi, blue lotus, and passionflower. While the experience is lengthened by the addition of an MAOI, it is also reported to be slowed down, similar to an [[Ayahuasca]] experience, but not lasting as long.
Changa is similar to enhanced leaf in the process to make it, but uses an [[MAOI]] containg herb in order to lengthen the experience. There are also many different changa recipes in terms of ratios and what is used to make it, with common MAOIs being caapi, blue lotus, and passionflower. While the experience is lengthened by the addition of an MAOI, it is also reported to be slowed down, similar to an [[Ayahuasca]] experience, but not lasting as long.


== Other methods (not suggested due to possible toxicity) ==
== Other methods (not suggested due to possible toxicity) ==
Line 68: Line 45:


==== Light bulb ====
==== Light bulb ====
A light bulb can be used like an oil burner pipe, but can be hard to handle safely, and some lght bulbs have coatings that can be toxic when inhaled.
A light bulb can be used like an oil burner pipe, but can be hard to handle safely, and some light bulbs have coatings that can be toxic when inhaled.
 
==See also==
==See also==
*[[Responsible use]]
*[[Responsible use]]
*[[Tutorial index]]
*[[DMT]]
*[[DMT]]
*[[Tryptamines]]
*[[Tryptamines]]
*[[Psychedelics]]
*[[Psychedelics]]
*[[Experience index]]
*[[Ayahuasca]]
*[[Ayahuasca]]
Retrieved from "http://psy.st/wiki/DMT_ingestion_methods"